Records required by ISO9001:2008 ISO9001:2008標準要求的記錄(iso9001是什么認證)
（譯者：不懂英文沒有關系，看標準條款號：一共21項。和2000版沒有變化）
Clause Record required
標準條款要求記錄
5.6.1 Management reviews
各次管理評審
6.2.2 e) Education, training, skills and experience
教育、培訓、技能和經驗（適當的——譯者注）
7.1 d) Evidence that the realization processes and resulting product fulfil requirements
各個產品實現過程和結果產品滿足各項要求的客觀證據 （適當的——譯者注）
7.2.2 Results of the review of requirements related to the product and actions arising from the review
與產品有關各項要求評審結果以及評審所引起的措施的記錄
7.3.2 Design and development inputs relating to product requirements
有關產品各項要求的各種設計和開發輸入
7.3.4 Results of design and development reviews and any necessary actions
設計和開發評審結果和必要的各種措施的記錄
7.3.5 Results of design and development verification and any necessary actions
設計和開發驗證結果和必要的各種措施的記錄
7.3.6 Results of design and development validation and any necessary actions
設計和開發確認結果和必要的各種措施的記錄
7.3.7 Results of the review of design and development changes and any necessary actions
設計和開發更改結果和必要的各種措施的記錄
7.4.1 Results of supplier evaluations and any necessary actions arising from the evaluations
供方評估結果和由于評估引起各種必要措施的記錄
7.5.2 d) As required by the organization to demonstrate the validation of processes where the resulting output cannot be verified by subsequent monitoring or measurement
組織要求展示其結果輸出不能靠后續監視或測量來加以驗證的那些過程的確認記錄
7.5.3 The unique identification of the product, where traceability is a requirement
當可追溯性有要求的產品唯一標識
7.5.4 Customer property that is lost, damaged or otherwise found to be unsuitable for use
遺失、損壞或發現不適用的顧客資產
7.6 a) Basis used for calibration or verification of measuring equipment where no international or national measurement standards exist
凡是沒有國際或國家測量標準的測量設備的校驗或驗證用的基準
7.6 Validity of the previous measuring results when the measuring equipment is found not to conform to requirements
當測量設備發現不符合要求的時候對該設備以往測量結果有效性
7.6 Results of calibration and verification of measuring equipment
測量設備的校驗和驗證結果
8.2.2 Internal audit results and follow-up actions
內部審核結果和跟蹤措施
8.2.4 Indication of the person(s) authorizing release of product
表明授權放行產品的人員
8.3 Nature of the product nonconformities and any subsequent actions taken, including concessions obtained
產品不符合的性質和任何隨后所采取的措施，包括獲得讓步批準
8.5.2 e) Results of corrective action
糾正措施的結果
8.5.3 d) Results of preventive action
預防措施的結果

icp認證許可證
深圳市高新技術企業認定的條件
“高新技術企業”你真的了解嗎？
CCC認證有什么好處，CCC認證能給企業帶來什么效益
供貨商手冊（ES）（二）
iso認證多少錢
關于2014年新版產品3C認證實施規則中CCC認證工廠檢查項目通用要求解析
2015版認證您怎么看？